Parallel Programming (1st half): Terminology

atomic
A statement or instruction is (truly) atomic if it is executed by the CPU in a single, non-interruptible step.
abstractly atomic
A statement or instruction that, at a certain level of abstraction, appears to be executed atomically. E.g. from a caller's perspective, a method synchronized append(x) of a queue appears to append element x in one step, but from the queue's perspective, this might take several steps.
Amdahl's law
Specifies the maximum amount of speedup that can be achieved for a program with a given sequential part. The pessimistic view on scalability.
bad interleaving
An interleaving that yields a problematic or otherwise undesirable computation. E.g. an incorrect result, a deadlock or non-deterministic output.
busy waiting
Occurs when a thead busily (actively) waits, e.g. by spinning in a loop, for a condition to become true. In the opposite scenario, the thread sleeps (i.e. is blocked; in Java: join(), wait()) until the condition becomes true. Trade-off: busy waiting uses up CPU time, whereas blocking may cause additional context switches.
cache coherence protocols
Hardware protocols that ensure consistency across caches, typically by tracking which locations are cached, and synchronising them if necessary.
cilk-style programming
Parallel programming idiom: To compute a program, execute code and spawn new tasks if required. Before returning, wait for all spawned tasks to complete. The system manages the eventual execution of the spawned tasks potentially in parallel. spawning and waiting on tasks creates a task graph which is a DAG.
CISC, RISC
CISC (complex instruction set computer) and RISC (reduced instruction set computer) are two fundamental CPU architecture models. Classical RISC is easier to study, since simpler: e.g. RISC instructions can only work on registers, and reading/writing memory are separate instructions.
concurrency
Dealing with multiple things at the same time (as opposed to parallelism: doing multiple things at the same time). Reasoning about and managing shared resources. Often used interchangeably with parallelism.
context switch
Given a computation unit (CPU), a context switch denotes the action of switching the unit from one computation to another. Typically refers to switching between processes, but can also refer to switching between threads. Depending on the size of the context ("large" for a process, "small" for thread), a context switch might be computationally expensive, i.e. require comparably much CPU time.
context switch overhead
An overhead refers to resources required to set up an operation. The resources can include computation time and memory. In terms of context switch, CPU needs to store to save the local data, program pointer etc. of the current thread/process, and load the local data, program pointer etc. of the next thread/process to execute. The resources need for context switch is context switch overhead.
critical section
A piece of code that, in order to guarantee correct program execution, may only be executed by one thread at a time.
data race
A program has a data race if, during any possible execution, a memory location could be written from one thread, while concurrently being read or written from another thread. Data race is often used interchangeably with race condition.
divide and conquer style parallelism
Also called recursive splitting. Solve a problem in divide and conquer style: solve a larger problem by recursively solving smaller sub-problems and combine their results. Solve the sub-problems in separate threads to gain a speedup. This way, work can be decomposed recursively to small tasks that can be efficiently scheduled on available tasks using e.g. the ForkJoin framework.
deadlock
Circular waiting/blocking (no instructions are executed/CPU time is used) between threads, so that the system (union of all threads) cannot make any progress anymore.
efficiency
Efficiency expresses, how much of the available cpu performance can be used. Heavily limited by the sequential part of a program. Efficiency = Sp/p.
ForkJoin framework
Introduced in Java 7, this framework embraces divide and conquer parallelism. Tasks can be spawned (forked) and joined by the framework. The ForkJoin framework automatically automatically assigns these tasks (lightweight) to Java threads (heavyweight) and may also execute multiple tasks in one thread to avoid thread context switching overhead.
functional unit
A component of a CPU (or core) that performs a certain task, e.g. executing integer arithmetic operations. An execution unit is one such a functional unit, see also RISC.
granularity
Coarse vs. fine: Splitting work into large tasks (coarse) reduces overhead, but might not use all available threads. Small tasks (fine granular) can be parallelized more, but also add more overhead. The trick is to find a "reasonable" size to minimize overhead and maximize parallelism.
Gustafson's law
Specifies how much more work can be performed for a given fixed amount of time by adding more processors. The optimistic view on scalability.
instruction level parallelism (ILP)
CPU-internal parallelisation of independent instructions, with the goal of improving performance by increasing utilisation of a CPU's functional units.
interleaving
Given multiple threads, each executing a sequence of instructions, an interleaving is a sequence of instructions obtained from merging the individual sequences. A sequentially consistent interleaving is one where the relative order of statements from one thread is preserved.
latency
An evaluation metric for pipelines. Latency measures the time a pipeline needs to process a given work item (e.g. a CPU instruction).
livelock
A situation in which all threads starve by infinitely often try to enter a critical section, but never succeeding. Similar to a deadlock, the system makes no real progress, although the threads execute statements/use CPU time.
liveness property
Property of a system: "something good eventually happens". Can only be violated in infinite time. Infinite loops and starvation are typical safety properties. Will be formally defined in Formal Methods using temporal logic.
locality

Has several meanings in the context of parallel programming:

  1. Locally reason about one thread at a time (also known as thread modularity). Simplifies correctness arguments.
  2. Data locality: related memory locations are accessed shortly after each other. Improves performance by optimal cache usage.
  3. Code locality: straight-line code increases opportunities for instruction level parallelism
lock
In general, a token/resource that can be acquired by at most one thread at a time. Locks are typically provided by a programming language to enforce mutual exclusion, by guarding/protecting a critical section. A lock can be acquired/locked by a thread, and is then held until it is released/unlocked. In Java, each object can be used as a lock (intrinsic/monitor lock), but the JDK also provides more complex locks.
lockout
Needlessly preventing a thread from entering a critical section.
maps
A map operatoes on each element of a collection independently to create a new collection of the same size. For instance vector addition that computes the sum of a collection of tuples (containing the nth element of both vectors).
mutual exclusion
Preventing more than one thread from being in a critical section, i.e. to execute a piece of code, at a given moment in time.
multiprocessing (multitasking)
Concurrent execution of multiple tasks/processes, typically refers to parallelism on the operating system level.
multithreading
Threads running in parallel.
parallelism
Doing mupltiple things at the same time (as opposed to concurrency: dealing with multiple things at the same time). Performing computations simultaneously; either actually, if sufficient computations units (CPUs, cores, ...) are available, or virtually, via some form of alternation. Often used interchangeably with concurrency. Parallelism can be specified explicitely by manually assigning tasks to threads or implicitely by using a framework that takes care of distributing tasks to threads.
parallelism (max speedup)
Parallelism is the maximum possible speedup: T1/T∞
parallel execution time
Tp: The time that is required to perform some work on p processors. T∞ denotes the time required for some work if we had an infinite amount of processors. In this scenario, the total runtime only depends on the time it takes to execute the sequential part of a program.
process
Independently running instance of a program/application, typically on the operation system level. Similar to a thread, but usually more heavy-weight (since a whole program) and encapsulated in memory.
process context
All state associated with a process, including CPU state (registers, program counter), program state (stack, heap, resource handles), and additional management information. A thread also has a context, but it is typically much smaller.
race condition
A program has a race condition if, during any possible execution with the same inputs, its observable behaviour (results, output, ...) may change if events happen in different order. Events here are typically scheduler interactions causing different interleavings, but could also be, e.g. changing network latency. Race condition is often used interchangeably with data race.
reductions
produce a single answer from a collection via an associative operator. Examples: max, count, rightmost, sum, ...
reentrancy
A lock is reentrant if it can be acquired (and released) multiple times by the same thread. If a lock is non-reentrant, trying to acquire it again might cause an exception or other problems.
safety property
Property of a system: "nothing bad ever happens". Can be violated in finite time. Exceptions, absence of deadlocks, and mutual exclusion are typical safety properties. Will be formally defined in Formal Methods using temporal logic.
sequential execution time
T1: The time that is required to perform some work on a single processor.
sequential cutoff
When decomposing work into tasks, stop splitting tasks at a given problem size (sequential cutoff). Problem size should be significantly larger than scheduling overhead.
sequential part
Part of a given program that can't be executed in parallel. Limits the maximum speedup.
scalability
In our context: By how much can a program be parallelized. What is the maximum speedup that can be achieved, given an infinite amount of processors. See "speedup".
scheduler
A management process, e.g. on the operating system level, that performs context switches. I.e. it interrupts/pauses/sends to sleep the currently running process (or thread), performs a context switch, and selects the next process (or thread) to run. Schedulers typically do not give guarantees when and how often they act, who gets selected next, etc.
scheduling overhead
The extra time spent by the system or the algorithm to distribute work on multiple threads/tasks.
shared resource
Any resource (memory location, input source, output sink, ...) shared by more than one thread.
speedup
Sp: How much faster does a program run using p processors, compared to running the sequential version of the same program. Sp = T1/Tp. Speedup is an absolute value. The relative value is called "efficiency".
starvation
A thread starves if it can never enter a/any critical section.
synchronisation
Some form of orchestration via threads. Typically, to prevent bad interleavings.
synchronized
Java keyword, enforcing mutual exclusion for a critical section via some object's intrinsic lock.
task graph, work, span
Graph (DAG) created by drawing nodes (tasks) and edges (spawns, joins). Work in a task graph (T1) is the sum of the cost of all nodes in the graph. span is the critical path (height) of the task graph. Corresponds to T∞.
throughput
An evaluation metric for pipelines. Throughput measures the amount of work (e.g. CPU instructions) that can be done by a pipeline in a given period of time.
thread
In general, an independent (i.e. capable of running in parallel) unit of computation that executes a piece of code. The concept of threads exists on various levels: hardware (CPU), operating systems, programming languages. In Java, thread also refers to an instance of the Thread class.
thread mapping
How a Java/JVM thread is related to an operating system thread. In native threading (most common), each JVM thread is mapped to a dedicated operating system thread. In green threading, the JVM maps several threads to a single operating system thread.
vectorisation
Using special machine code instructions to execute a single operation (e.g. plus) on a chunk of data (e.g. an array segment). Can significantly improve performance. Code can be vectorised automatically, by compilers, or manually, by using intrinsics libraries provided by hardware vendors.
warm-up
In order to perform optimally, the JVM often needs some time to 'learn' what kind of code is typically being executed. This applies also and especially to the ForkJoin framework, which needs some time to optimally distribute task on threads.
work partitioning
Split-up of a program into smaller tasks that can be executed in parallel. Ideally, each task performs its work independently of any other task, for instance on separate areas of a data structure.